It’s the first question almost everyone asks us: “What does an epoxy flake floor actually cost?” The honest answer is “it depends” — but that’s not very useful, so here’s a clear breakdown for homes and businesses around Albury, Wodonga and the border region.
The short version
As a rough guide, a professionally installed flake floor in our area typically lands somewhere between $70 and $95 per square metre, depending on the condition of the slab and the system you choose. Because a flake floor is built up from several coats and uses a fair amount of product, around $70/m² is realistically the entry point — a standard double garage on a sound slab usually sits in the lower-to-middle of that range, while heavily damaged or oil-stained slabs that need extra preparation sit at the higher end.
If you’re after a plain, solid-colour epoxy floor instead — fewer coats and no decorative flake — that can start from around $50/m².
These are indicative figures only — the right way to get a real number is a free on-site quote, because the slab is what really sets the price.
Five things that drive the cost
1. Concrete preparation
This is the single biggest factor. A good flake floor is only as good as the prep underneath it. Diamond grinding, crack and joint repair, and removing old coatings all take time. A clean, sound slab is cheaper to coat than a cracked, painted or moisture-affected one.
2. The size and shape of the area
Larger, open areas are more efficient per square metre than small or broken-up spaces with lots of edges, steps and cut-ins. Stairs, skirtings and tricky access all add labour.
3. The system and top coat
A premium UV-stable polyaspartic top coat costs more than a basic clear, but it resists yellowing and wears better — worth it for areas that see sun or heavy traffic.
4. Flake coverage and colour
Full “broadcast” flake coverage uses more product than a light scatter. The colour you choose from the Vinyl Flakes range doesn’t change the price much, but the coverage density does.
5. Indoors vs outdoors
Outdoor areas — patios, alfresco, pool surrounds — need slip-rated finishes and UV-stable coats, which can nudge the price up compared with an internal garage.
Is it worth it?
A flake floor is seamless, easy to clean, chemical- and stain-resistant, and — done properly — lasts for many years without peeling. Compared with re-doing a cheap paint-on coating every couple of years, it’s usually the better long-term value. See the difference on our gallery, or read our comparison of flake vs polished concrete.
